SCL-1/8-0-STK TE Connectivity size 1/8" (3.2/0.6mm) Semi-rigid Encapsulation Tubing

SCL-1/8-0-STK Semi-rigid, Encapsulated-Lined, Polyolefin Heat Shrink Tubing.

Supplied in 1.2 mtr lengths.

Encapsulates components, splices, and terminations where moisture resistance and mechanical protection are required. The encapsulant melts and flows to fill surface irregularities of the substrate. While still hot, the tubing can be blocked to form a wire breakout.

Raychem TE Connectivity SCL is designed to provide one-step moisture-proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. 

Manufactured from radiation cross-linked polyolefins, SCL has an inner wall, which melts at 100°C, and is forced into the crevices and interstices by the shrinking action of the outer tubing. When cooled, the entire mass becomes a rigid, tough, homogeneous covering with controlled wall thickness. SCL shrinks between 17% and 40% of its supplied diameter according to size and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions.

Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength.

Other sizes are available upon request. 

• 3:1 shrink ratio
• Splash-resistant, moisture-resistant covering; not intended for use where immersion in fluids is required
• Rugged protection against abrasion, vibration, and flexing
• Excellent strain relief and insulation of weak points
• RoHS compliant
• TE Connectivity