Please fill in the form below to receive your quotation:
How To Find Us
Text & Number
Text & Number Element
- Product Info
Application Range = 75mm - 145mm
Adhesive lined heat shrinkable polyolefin cable caps used to seal the ends of plastic, rubber and paper insulated cables from moisture, dirt and corrosion. Cable caps are internally coated with a hot-melt adhesive making them water-resistant.
End caps are used for protecting the unused cable from environmental effects. They also offer insulation on the unused end of electrical cable connected to supply.
Whilst we can provide various gas torches, these Heat Shrink End Caps can also be applied with our wider range of safer, more easily controlled and compact modern electronic heat guns.
They can be used on cables at up to 0.05 MPa internal pressure between -30°C and 70°C.
Each cable cap covers a wide range of cable sizes as shown in our datasheet.
Features & Benefits:
- Resistant to common fluids & chemicals
- Rugged installation
- Seals & protects cable ends from the environmental effects
PROPERTIES VALUE STANDARD Physical Tensile Strength 12 N/mm' (Mpa) (min.) ASTM D638 Ultimate Elongation 350 % (min) ASTM D638 Density 1.05± 0.2 gm/cm' ASTM D792 Hardness 45 ±10 Shore D ASTM D2240 Water absorption 0.2 % (max.) ASTM D570 Thermal Accelerated ageing (120°C for 500 hrs) ASTM D2671 Tensile Strength 11 N/mm' (Mpa) (min.) ASTM D638 Ultimate Elongation 300 % (min.) ASTM D638 Low Temperature Flexibility
(-40°C for 4 hrs.)
No Cracking ASTM D2671 Heat Shock (250°C for 30 min.) No cracking or flowing ESI 09-11 Shrink Temperature 125°c IEC 216 Continuous Temperature Limit -40 to + 100°c IEC 216 Electrical Dielectric Strength 12 KV/mm.(min) ASTM D149 Volume Resistivity 1 x 1014 Ohm.cm (min) ASTM D257 Dielectric constant 5 (max.) ASTM D150