Back

Please fill in the form below to receive your quotation:

Company Details

Printed Cable Tie Details

Captcha

* Required Fields

How To Find Us

  • Text
  • Number
  • Text & Number

Text Element

Text & Number Element

Number Element

Skip Personalisation | Request a Callback

HSE Safety Kit Box 230V for Leister Welding Machines (RCCB)

More Views

HSE Safety Kit Box 230V for Leister Welding Machines (RCCB)

NEW: HSE Residual Current Circuit Breaker Safety Box for use with our Leister Welding Machines - Leister Varimat V2 230v, Bitumat B2 75mm 230v and Bitumat B2 100mm 230v.


16amp version also available upon request - Contact us for details: 01942 723101

1 off
Excl. VAT: £651.00 Incl. VAT: £781.20
OR
Product Info

Details

NEW - HSE Residual Current Circuit Breaker Unit (RCCB)

Genuine accessory approved by Leister

Utilised for Leister Welding Machines and RCCB Safety Boxes. Designed to provide safety against electrocution by detecting current leaks. In the presence of electronic malfunction, the RCCB will trip and prevent further current from entering the system, meaning a reduced risk of injury, electronic failure and fires. Particularly useful for larger electronic devices such as our welding machines.

The RCCB unit is fitted with a lockable selector switch marked for “mains” or “generator”. The latter position provides the reference connections required for correct operation of the RCCB when a generator is used.

The Residual Current Circuit Breaker (RCCB) Unit should be plugged in either to the fixed supply or to the generator via its 2m lead. This unit should be mounted securely above ground level if possible. If not then it should be stood on the floor/ground in a position where it is unlikely to be damaged and firmly held down with sandbags or weights so that it cannot be knocked over.

Safety Information:

The RCCB should be tested each day before work commences.

Connect the equipment to the power supply as above with the isolator in the OFF position and the RCCB ON/OFF switch (behind clear plastic panel) to OFF. Switch on the isolator, then the RCCB and press the test button. The RCCB should trip out. If it doesn’t, check that there is power to the RCCB. If there is, the RCCB unit is faulty. It should not be used but returned to Hilltop Products immediately for inspection.

ANY QUERIES ABOUT THE CORRECT OR SAFE FUNCTIONING OF THE EQUIPMENT SHOULD BE REFERRED TO THE SUPPLIER.

 

 

Reviews

Can't find what you are looking for?

If you can’t find what you are looking for, or need volume discounts, give us a call on +0044 1942 723101. Our sales team are always happy to help!

Contact Us

Some of our valued customers

30 08 2019

Cable Hazards to Look Out for in the Workplace and How to Avoid Them

Read more...
15 08 2019

Cable Safety in the Garden

Read more...
26 06 2019

Cable Safety this Festival Season

Read more...