- Product Info
All are between 1.25mm and 1.5mm Wall Thickness - Flexible Metric Pneumatic Tubng
Our Flexible Nylon Hose Tube is supplied in a range of up to 11 colours, and natural (opaque). Other colours are available by request.
Manufactured with a flexible, plasticised, high viscosity extrusion grade of Polymide 12 (PA12) which is impact modified and heat and UV stabilised. Our Flexible Nylon is therefore low weight, flexible, and of low density.
The recommended operating temperatures for Flexible Nylon are between -40°C and +80°C constant and up to +110°C intermittent. Working pressures and burst pressures for each size given in the product list in BAR and PSI. (See Spec Sheet)
We stock a comprehensive range of Flexible Nylon Tube PA12 from 1.5mm I/D to 28mm O/D in metric sizes.
Smaller diameter Flexible Nylon Rod is also available, Contact us for more information: 01942 723101
• Industrial Pneumatics
• Machine Tool
• Petroleum based chemical transfer
• Pest control
• Fluid Handling
Suitable for a wide variety of Applications:
- Industrial pneumatics
- Fluid Handling
Temperature range: -40;C to +80°C contiuous and +110°C intermittent.
This figure is based on the theoretical burst pressure at 20°C, using a safety factor 4:1. Any increase in temperature above 20°C will result in a decrease in pressure capabilities.
1 BAR =approx. 14.5 PSI
All our (PA12) Flexible Nylon Tubing conforms to the following standards:
- BS 5409 (Part 1)
- S.M.M.T C2C
- SAE J1394 (Type A)
- SAE J844 (Type A)
- DIN 73378
- DIN 74323
- DIN 74324 (Parts 1 & 2)
- ISO-TC 22SC/2
- ISO 7628