Feedback Form
Leads to Insight

Raychem S1030 Heatshrink Hot Melt Tape

More Views

Raychem S1030 Heatshrink Hot Melt Tape
This is a non-flame retarded hot melt black adhesive tape which is based on EVA/polyamide polymers.
1 x 10 mtr Roll
Excl. VAT: £20.47 Incl. VAT: £24.56
  • Buy 3 for £17.96 (£21.55 incl. tax) each and save 13%
  • Buy 10 for £15.66 (£18.79 incl. tax) each and save 24%
  • Buy 25 for £13.35 (£16.02 incl. tax) each and save 35%
OR
Product Info

Details

This is a non-flame retarded hot melt black adhesive tape which is based on EVA/polyamide polymers.The tape is often pre-applied to moulded shapes and the pre-coat designation is / 180. It has an operating temperature of -80°C to +80°C. This product is recommended for high flexibility at low temperatures.

Size: Width: 20mm, Thickness: 0.3mm

Specification: RK6017

 

Typical Applications:

S1030 Tape is recommended for marine applications where salt water is a threat. The adhesive is very user-friendly in that it exhibits excellent flow extremely quickly when heated under normal installation conditions. Not recommended where aggressive solvents may be present. Also not recommended for terminations under in-service flexural stress at temperatures above 40°C. S1030 exhibits good adhesion to a wide range of substrates and has become the recommended hot melt adhesive for System 100 ie. Zerohal tubing and cable jackets, -100 moulded shapes.

Recommended with -25 moulded shapes, DR25 Tubings, FDR cable jackets, RNF, nRW-175, Polyurethane materials. Can be used as a repair adhesive in conjunction with RP-4800 tubing and also withb S1081 harness repair tape.

Applications
S1030 Tape is recommended for marine applications where salt water is a threat. The adhesive is very user-friendly in that it exhibits excellent flow extremely quickly when heated under normal installation conditions. Not recommended where aggressive solvents may be present. Also not recommended for terminations under in-service flexural stress at temperatures above 40°C. S1030 exhibits good adhesion to a wide range of substrates and has become the recommended hot melt adhesive for System 100 ie. Zerohal tubing and cable jackets, -100 moulded shapes. Recommended with -25 moulded shapes, DR25 Tubings, FDR cable jackets, RNF, nRW-175, Polyurethane materials. Can be used as a repair adhesive in conjunction with RP-4800 tubing and also withb S1081 harness repair tape.
Specifications
Operating temperature: -80°C to +80°C. Specification: RK6017
Downloads
Reviews

Find what you are looking for?

If you can’t find what you are looking for, or need volume discounts, give us a call on +0044 1942 723101. Our sales team are always happy to help!

Contact Us

Some of our valued customers

13 10 2017

How to apply heat shrink tubing properly

Read more...
06 10 2017

Heat Shrink Tubing Specification Guide

Read more...
25 09 2017

Aiding the Alien Landscapes of Krypton

Read more...