Feedback Form
Leads to Insight

TE Connectivity TE3124 600dpi Thermal Transfer Printer with Wintotal Software (USED130)

More Views

TE Connectivity TE3124 600dpi Thermal Transfer Printer with Wintotal Software (USED130)

Only 7 hour 43 mins Operative Time for Demo Purposes: Robust 24 hour duty cycle TE3124 600dpi thermal transfer printer. Specially designed to print on a wide range of labels, cable markers, and identification marker sleeves. Also known as the CAB A4+ 600dpi Printer.

1 off
Excl. VAT: £1,650.00 Incl. VAT: £1,980.00
Product Info

Details

This TE3124 thermal transfer printer, comes complete with printer, power supply leads and Wintotal printing software and USB Dongle. These printers are typically over £2600.00 new! With the Wintotal Software usually costing £475.00 alone! This has been used for demo purposes with minimal use, all system info available below.

Introducing the TE3124-Printer : Thermal Transfer Printer:

The TE3124-PRINTER is a high performance mid-range Identification printer for marking Heat-shrinkable Marker Sleeves, Cable Marker Tags and Labels. With a 600 dpi print head, it’s capable of marking a broad range of products for use in commercial and industrial environments.

To see a list of all compatible products for the TE3124 Printer, check out the PDF document under the "Downloads" tab.

System Status Information:

  • Operative Time: 7 hours 43 mins
  • Number of labels: 451
  • Thermal Transfer: 10.056m
  • Thermal Direct: 2.057m

Printer Applications

  • For printing on heat-shrinkable marker sleeves, cable marker tags and labels
  • For printing high quality texts, graphic images and barcodes

Printer Dimensions

  • Depth : 446mm (17.5 inches)
  • Height : 274mm (10.8 inches)
  • Width : 242mm (9.5 inches)
  • Weight : 9 kg (19.8 lb)

Printer Properties

  • Print Speed: 30, 40, 50, 75, 100, 125mm/s. (1, 1.5, 2, 3, 4, 5 in/s)
  • Print Width Max: 105.6mm (4.16 in)
  • Print Definition: 600 dpi Thermal Transfer
  • Lable Width: 4 to 106mm (0.16 to 4.2 in), 116mm (4.6 in) backing paper width
  • Label Height: 5mm (0.2 in) minimum to 4,000mm (157.5 in) maximum
  • Media Roll Capacity: 205mm (8 in) Outside Diameter, inside core diameter 38 – 100mm (1.5 – 4 in)
  • Ink Ribbons: 25mm (1 inch) core, ink inside or outside, variable length up to 500M (1640 ft)
  • Sensor Variable position Gap & Reflective (automatic calibration)
  • Operating Temp: +5°C to +40°C (+41F to +104F).
  • Operating Humidity 10% to 85% non-condensing RH
  • Power Supply 100 - 240VAC, 50/60 Hz, auto switching : 250W max
  • Power Consumption: Power save mode 9W. Typical 45W / Max 65W
  • Electronics RAM: 64MB, Processor speed 266MHz, Memory IFFS flash 8MB

Printer Interfaces

  • USB 2.0 full speed slave for PC connection at the rear of the printer.
  • USB master at rear of the printer X2
  • RS232 C 1.200 up to 230.400 Baud rate / 8 Bit
  • Ethernet 10 / 100 Base T, LPD, Raw IP-Printing, ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP
Specifications

System Status Information:

  • Operative Time: 7 hours 43 mins
  • Number of labels: 451
  • Thermal Transfer: 10.056m
  • Thermal Direct: 2.057m
Downloads
Reviews
Video

Additional Information

The ideal Heat Shrink Tubing for using along with this machine is our Flattenened Printable Zero Halogen Tubing. Endless flattened zero halogen limited fire hazard heat shrink tubing with ideal properties for identification by thermal transfer printing. We are pleased to announce that our ZH201B complies with Boeing Specification Standard BSS 7239 & Railway normative CEN/TS 45545-2 and UNI CEI 11170-3.


Find what you are looking for?

If you can’t find what you are looking for, or need volume discounts, give us a call on +0044 1942 723101. Our sales team are always happy to help!

Contact Us

Some of our valued customers

23 10 2017

What is Neoprene and why is it used so widely?

Read more...
13 10 2017

How to apply heat shrink tubing properly

Read more...
06 10 2017

Heat Shrink Tubing Specification Guide

Read more...